Please wait...

Mechanical Properties of Fluids Test - 77
Result
Mechanical Properties of Fluids Test - 77

  • /

    Score

  • -

    Rank
Time Taken: -
  • Question 1/10
    4 / -1
    Two solids A and B float in water. It is observed that A floats with 1/2 of its body immersed in water and B floats with 1/4 of its volume above the water level. The ratio of the density of A to that of B is
    Solutions

  • Question 2/10
    4 / -1
    A man is carrying a block of a certain substance (of density 1000 kgm–3) weighing 1 kg in his left hand and a bucket filled with water and weighing 10 kg in his right hand. He drops the block into the bucket. How much load does he carry in his right hand now ?
  • Question 3/10
    4 / -1
    A candle of diameter d is floating on a liquid in a cylindrical container of diameter D [D >> d] as shown in figure. If it is burning at the rate of 2cm/hour then the top of the candle will

  • Question 4/10
    4 / -1
    An engine pumps water continuously through a hose. Water leaves the hose with a velocity v and m is the mass per unit length of the water jet. What is the rate at which kinetic energy is imparted to water ?
    Solutions

  • Question 5/10
    4 / -1
    An incompressible liquid flows through a horizontal tube as shown in the following fig. Then the velocity v of the fluid is

    Solutions

  • Question 6/10
    4 / -1
    There is a hole in the bottom of tank having water. If total pressure at bottom is 3 atm (1 atm = 105N/m2) then the velocity of water flowing from hole is
    Solutions

  • Question 7/10
    4 / -1
    There is a hole of area A at the bottom of cylindrical vessel. Water is filled up to a height h and water flows out in t second. If water is filled to a height 4h, it will flow out in time equal to
    Solutions

  • Question 8/10
    4 / -1
    A square plate of 0.1 m side moves parallel to a second plate with a velocity of 0.1 m/s, both plates being immersed in water. If the viscous force is 0.002 N and the coefficient of viscosity is 0.01 poise, distance between the plates in m is
    Solutions

  • Question 9/10
    4 / -1
    A small sphere of mass m is dropped from a great height. After it has fallen 100 m, it has attained its terminal velocity and continues to fall at that speed. The work done by air friction against the sphere during the first 100 m of fall is
  • Question 10/10
    4 / -1
    We have two (narrow) capillary tubes T1 and T2. Their lengths are l1 and l2 and radii of cross-section are r1 and r2 respectively. The rate of flow of water under a pressure difference P through tube T1 is 8 cm3/sec. If l1 = 2l2 and r1 = r2 , what will be the rate of flow when the two tubes are connected in series and pressure difference across the combination is same as before? (= P)
    Solutions

User Profile
-

Correct (-)

Wrong (-)

Skipped (-)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Get latest Exam Updates
& Study Material Alerts!
No, Thanks
Click on Allow to receive notifications
×
Open Now